Our Story
Cabinets are expensive. Custom cabinets are even more expensive. When we started as a remodeling company, we were always getting requests for less expensive alternatives to replacement for cabinets that were still in good condition and just needed a facelift. We started our Cabinet Refinishing at that point, sanding down, and spraying professional cabinet finishes on existing cabinets. Over the years, that grew into Cabinet Refacing, and now almost 15 years later, building full custom cabinets. One thing that has never waivered is our commitment to provide the best possible finish, every time. To many cabinet companies, the finish is just another step of the process to get the product out the door. To us, the finish is everything. Its where we started, and where we will always focus.
Our Process
All of our cabinet Refacing projects, from the door building and finishing, to the on-site work sanding, masking, and spraying the boxes is done 100% in-house. We don't utilize subcontractors. When you can control the process, you can control the quality.
-We can complete a typical Refacing job in just 5 days in your house. Compared to 10-14 days like many others. We use the same steps every time, which reduces time and produces a consistently top notch result.
- We use only the best 2 component (2k) solvent based Polyurethan finishes, and 2k Conversion Varnish Clear finishes. These are the most durable cabinet grade finishes available on the market today. All of our finishes meet KCMA (Kitchen Cabinet Manufacturing Association) or AWI (American Wood Institute) certifications.
-Our finish is 100% spray applied from start to finish. There are no brush marks, no roller stipple, and no drips. Just that smooth factory like finish.
We use only the best 5 Stage HVLP and Air-Assisted Airless sprayers from Fuji, Graco and Kremlin. We apply the same exact finish we use on our new custom cabinets, on your existing ones.
Setup your free quote and let us show you what sets us apart as the premier cabinet Refacing company in Detroit.
What to Expect:
Lets be honest, can you imagine not having access to your kitchen for two weeks like many traditional painting methods require? We try to making your remodeling project as quick and painless as possible. Using our process, we can complete you kitchen in just 3-5 days!
Days 1-4
In House Work
We remove all of the cabinet doors, drawer faces, drawer boxes, hinges and guides. We sand the cabinets down to bare wood, mask off the rest of the kitchen, and spray 2 primer coats. We sand this with 320g once dry, and then spray two topcoats of finish.
The Doors
At our Shop
While your boxes are being worked on in your house, we are building, sanding, priming and finishing your new doors and drawer fronts at our shop.
Day Five
Reassembly
All the doors are individually foam wrapped for transport and loaded into our special trailer in slots for protection.
We remove the masking, re-install all the existing or new guides, hinges and handles and door and drawer faces. A quick cleanup, and you have your brand new looking kitchen in a fraction of the time of a full remodel.